Adam Audio A44H 4″ Active Studio Monitor

Adam Audio A44H 4″ Active Studio Monitor Overview:

The A44H offers a low-profile alternative to the A Series A7V while delivering similar performance characteristics.

High Standards Low Profile

With a 19-inch width the horizontally oriented A44H can sit on a standard rack shelf or be mounted above or below a display. The completely new design also enables the A44H to serve as a center speaker in immersive and 3D speaker configurations.

Dual 4-inch long-throw woofers and the X-ART tweeter deliver a wide frequency range while onboard DSP-based tuning capabilities enable you to tweak the sound easily.

Features

• German Handmade Precision X-ART Tweeter with rotatable HPS waveguide
• 2 x 4” Woofer (Multi-Layer Mineral)
• Cumulated Amp. Power Peak: 130 W
• Frequency Response @ -6 dB: 46 Hz 45 kHz
• Max. peak SPL per speaker at 1 m: 103 dB SPL

Future Proof Innovations

Explore The Technology

ADAM Audio monitors have earned a worldwide reputation for the innovations that we have established in the field of loudspeaker technology. Here you can explore the technology of the A44H.

A Control Remote Software

The DSP-based functionality of all A Series monitors can be controlled remotely and in real time over ethernet using A Control.

Rotatable HPS Waveguide & X-Art Tweeter

Made from a new glass fiber polymer compound the HPS waveguide enables the X-ART tweeter to disperse sound in space with controlled consistency.

Bass Reflex System Cabinets And Mounting

The new A Series cabinets build on the heritage of ADAM Audio and the AX Series in particular.

Automated Room Correction With Sonarworks

ADAM Audio is proud to partner with Sonarworks on an automated room correction solution that runs directly on the DSP of A Series monitors.

Specifications

Acoustics

• Frequency Response: @ -3 dB: 49 Hz 41 kHz
• Frequency Response: @ -6 dB: 46 Hz 45 kHz
• Max. peak SPL per speaker at 1 m (sine bursts): 103 dB SPL
• Max. peak SPL per speaker at 1 m (IEC-weighted noise): 110 dB SPL
• Crossover Frequencies: 2.4 kHz

Drivers

• Woofer
• Basket Diameter: 2 x 4″
• Voice Coil Diameter: 1″ (25 mm)
• Cone Material: MLM

Tweeter

• Type: X-ART
• Diaphragm Area: 4 inch (2420 mm)
• Equivalent Diaphragm Diameter: 2″ (56 mm)
• Velocity Transform Ratio: 4 to 1
• Diaphragm Weight: 0.17 g
• Waveguide: HPS (rotatable)
• Waveguide Dispersion: 120 horizontal 70 vertical

Amplification

Woofer

• Amplifier Type: PWM
• Peak (10% THD limiter deactivated): 110 W
• RMS (1% THD limiter deactivated): 90 W

Tweeter

• Amplifier Type: Class A/B
• Peak (10% THD limiter deactivated): 20 W
• RMS (1% THD limiter deactivated): 15 W

Signal Processing

• AD converter: 24-bit
• Internal sample rate: 96 kHz
• Delay range resolution: 0 10 ms 0.1 ms
• Protection: Independent peak and thermo limiters for each driver and amplifier thermo limiters

Audio Input Connectors

• Analog: XLR RCA
• Input Impedance: 9 kOhm / 3.3 kOhm
• Max. Input Level: +19 dBu

Control Options [via Network]

• Networking Connector: RJ45
• Connection Type: Ethernet
• Communication Protocol: OCA using standard IP data
• Control Software: A Control (Windows and MacOS available)
• Room Adaption Options: Backplate Extended Sonarworks SoundID Reference integration
• Advanced Room Adaptation: 6 x PEQ Level Delay
• Third-party Calibration Compatibility: Import from Sonarworks SoundID Reference

Control Options [via Backplate]

• Input Sensitivity: 0 dBu = 100 dB SPL at 1 m @ 0 dB level setting
• Level: -12 dB to +12 dB
• Input Selection: Balanced unbalanced
• Voicings: Pure UNR
• Room Adaption:
• Bass: +2 0 -2 -4 dB
• Desk: 0 -2 -4 dB
• Presence: +1 0 -1 dB
• Treble: +1.5 0 -1.5 dB

General Data

• Display: Front panel multi-colour LED
• Cabinet Design: Dual front ported
• Cabinet Material: Vinyl wrapped MDF and painted MDF front panel
• Mounting options: Threaded inserts on the bottom of the cabinet (4 x M8)
• Power consumption (max idle sleep): 220 W 10 W 3.5 W
• AC Input Voltage: 100 240 V 50/60 Hz
• Power Rating: 300 W max.
• Operating Conditions: -10 C to +40 C (+14 F to +104 F); <75 % RH non-condensing
• Weight: 9.7 kg (21 lbs 6 oz)
• Dimensions (Height x Width x Depth): 135 mm x 432 mm x 350 mm (5 3/8″ x 17″ x 13 3/4″)
• Delivery Contents: A44H loudspeaker power cable Quick Start Guide